Angle Seat Valve DN25 DN15/32 BSPP Stainless Pneumatic Air Actuated N/C PTFE/FKM

Description

Parameter： Control pressure: 0.3Mpa-1Mpa Body material: 304 stainless steel Pneumatic form: plastic head Spool seal: PTFE Stem seal: PTFE/FKM Piston seal: FKM/NBR Applicable medium: water, neutral gas or liquid, alcohol, oil, organic solvent, water vapor, weak acid or weak alkali solution Medium temperature: PTFE: -10 ° C - +180 ° C Ambient temperature: -10 °C - +60 °C Viscosity: up to 600MM2/s Control medium: air/neutral gas Control pressure range: 0.3-1MPA Installation: Install as needed, preferably with the actuator facing up Features: large flow, long life, maintenance free, reliable Package Included: 1*DN15 Angle Seat Valve
Angle Seat Valve DN25 DN15/32 BSPP Stainless Pneumatic Air Actuated N/C PTFE/FKM
Parameter
Model
: DN15
/
DN
25/
DN
32
Control pressure: 0.3Mpa-1Mpa
Body material: 304 stainless steel
Pneumatic form: plastic head
Spool seal: PTFE
Stem seal: PTFE/FKM
Piston seal: FKM/NBR
Applicable medium: water, neutral gas or liquid, alcohol, oil, organic solvent, water vapor, weak acid or weak alkali solution
Medium temperature: PTFE: -10 ° C - +180 ° C
Ambient temperature: -10 °C - +60 °C
Viscosity: up to 600MM2/s
Control medium: air/neutral gas
Control pressure range: 0.3-1MPA
Installation: Install as needed, preferably with the actuator facing up
Features: large flow, long life, maintenance free, reliable
Widely used in: beer beverage filling equipment machinery, textile printing or bleaching, gas industry pharmaceutical and medical equipment, pharmacy, chemical industry high temperature sterilization, disinfection; foaming machinery, foaming equipment; water pollution treatment.
Installation and removal:
1. Connect the valve to the pipe to ensure that it is in the same direction as the flow and attached to the body (the outside of the body represents the direction of fluid flow, according to the installation);
2.
P
lease remove the actuator when welding installation;
3.
T
hreaded or flanged: correct installation;
4. Disassembly: Ensure that the pressure has been removed before disassembling the valve; carefully disassemble and properly store the thread and sealing material after removal.
5. The torque required for the connection of the valve and the pipeline is large enough. The torque value of the torque is as follows: DN15 to 40Nm
6.
E
nsure that the pipeline and no residual interface when installing.
7. Make sure there are no leaks before use.
Payment
Delivery details
Terms of sales
About us
Contact us
Payment
We accept ebay payment 。
Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.
Delivery details
Shipping:
2-9 working days to: USA
Terms of sales
We maintain high standards of excellence and strive for hundred percent customer satisfaction. Feedback is very important to us. We hope that you contact us immediately before you give neutral or negative feedback, so that we can address your concerns. It is impossible to address issues if we do not know about them!
About us
Your satis
faction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.
a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.
b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.
c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.
Thank you.
Contact us
Business Hour
Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)
Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.
Please contact us with ebay message.
Please feel free to contact us if you have any questions.
On Aug 29, 2022 at 22:49:18 PDT, seller added the following information: